StockIQ Release Notes (v2026.11.10) - All Changes
Major Enhancements
Edison Updates
- You can paste a screenshot into the Edison chat with Ctrl+V or drag one in, and Edison reads it along with your question; admins can turn screenshots off on the Edison Admin screen.
- Any table in an Edison answer can now be downloaded as an Excel or CSV file.
- A new gear button on the Edison panel and the Edison page opens Edison Preferences, Edison can update your preferences for you after showing the change, and what you write there about answer style now takes priority over Edison's default formatting.
- Edison can create, edit and delete demand events from chat, showing you a preview to approve first.
- Edison can list your lead time overrides, including item-sites with more than one, and create or replace overrides for several suppliers or item-sites in one preview.
- Edison can read vendor ordering schedules, tell you which vendors are not scheduled to order on a given day, and set a vendor's schedule or turn auto-ordering on or off.
- Edison can place transfer orders between sites, including the inventory balancing transfers that Suggested Transfers recommends.
- Edison can suspend, ignore and re-activate alerts for you, and create, list and cancel report subscriptions from chat, such as "send me this every Monday at 9".
- Edison can change more settings for you, including Global Unusual Sales Settings, Global Lead Time Settings and Default StockIQ Forecast Algorithm Settings, and can read your ABC class settings.
- Edison is better at finding settings and main-menu screens by name, gives the menu path to each, and suggests the closest matches when nothing goes by the name you used.
- Edison can show item-site notes, filter dead stock and excess on whether an item-site has a note, and add a note after you approve a preview.
- Edison can answer more questions, including which manual forecasts are doing the most harm, customer demand versus component and transfer demand, service level for the items a customer buys, forecast error across several dimensions at once, a best-case and worst-case demand range, what changed recently, a site's receipts or on-hand changes over a date range, and which lots are expiring.
- Edison's inventory, turns and service level charts now accept the same filters, date range, grouping and hierarchy level.
- When Edison explains a forecast, it now says whether the current period projection was applied, what each forecast event does, and can break one period into parts that add up, and period-over-period comparisons leave out the period still in progress.
- Edison can read every value in a column of a file you attach, and explains what it can do with attached files, forecast imports and memory when you ask.
- Edison Insights, including Focus Today, Projected Stockouts and Projected Excess, now lead with the main takeaway in bold followed by short bullets with the key figures.
- Edison offers only the actions you have permission to use and names the permission needed for the others, lists only the sites, suppliers, buyers and items you can see, and records changes to its memory in the audit trail.
- Edison handles long item lists and multi-step questions faster and more reliably, and when you type "yes" it applies only the change you were last shown.
- Eight Help Center articles were updated to answer questions Edison could not answer before.
Minor Enhancements
Supply
- Custom fields can now name the ERP field their values come from, and supplier scoring can measure receipts against a supply order line date custom field, such as an original promised date, without changing StockIQ's own dates.
Data Import & Integrations
- MCP connections now list only the tools a token can run, and non-production instances identify themselves as such to MCP clients, in Edison emails and before an at-risk customer email is sent.
- The public API, MCP and interface specification references have been refreshed, and their tables now wrap in narrow windows.
Settings & Administration
- Admins can now control who opens Global Replacement Settings with its own Edit Global Replacement Settings permission.
- The audit trail now records suspending, ignoring or activating alerts on the Alerts screen, settings imported by your StockIQ team, and who started each data refresh.
- Each settings screen now shows its own description on the Settings page, and Help Center articles use the current screen names and menu paths.
User Interface
- Projected-value columns on Place Orders, Order Schedule, Forecast Manager, Suggested Transfers and the ordering wizards now have distinct captions, so the same words no longer label different numbers.
- Options in toolbar drop-down menus are now hidden from users who don't have permission to use them.
Performance
- StockIQ runs faster and more steadily: screens keep their data cached during data refreshes, detail screens make fewer database calls, imports summarize their errors faster, and heavy automated use by one user can no longer slow the site for everyone.
Major Bugs
- SAP Business One nightly extracts recover from ERP restarts - The SAP Business One extract now retries when the ERP service restarts or briefly drops the connection. If every download still fails, the refresh stops before the import instead of loading incomplete data, and the error is reported clearly.
Minor Bugs
- A replaced item-site that still has stock now gets its own depletion forecast when the default forecast settings are set at the Item level.
- Order lines with different suppliers are now each checked against their own supplier's minimum order quantity settings.
- Changes to the default and global forecast settings, such as Volatility, now update statistical forecasts at the next calculation in Automatic mode.
- When an order line is split by a maximum order quantity, each piece now gets its share of the quantity instead of the whole amount.
- Split order lines now share StockIQ's suggested and pre-price-break quantities between the pieces instead of copying the full amount to each.
- Saved Place Orders and Place Blankets sessions now reload correctly, without duplicate or dropped lines, lines you unchecked stay unchecked, and deleting a session no longer affects other sessions.
- Place Blankets and Drop Ship no longer place an order a second time when you return to the last step.
- Placing orders at the same moment as another user no longer produces duplicate order numbers.
- The Order Wizard's container fill with Fill At or Above and Use Coverage now fills the container instead of shrinking the order.
- The Drop Ship dialog no longer shows the "Show Buy To Order Items Only" checkbox when it is opened from a sales order selection, where it had no effect.
- Price break analysis no longer uses a price break that has expired, is not yet effective or is used up, and Place Orders no longer shows one as available.
- Each price break Quantity Limit, including Order Days of Supply, now saves and compares the right measure, and buy-ahead is skipped when usage is unknown.
- The Days Of Supply Limit field on Global Replenishment Settings and the Blanket PO Prefix and Counter on Global Order Numbering Settings now carry the right labels.
- Order cycle overrides for two suppliers at the same site are no longer mixed up.
- Expedite and De-Expedite recommendations now give the right dates and lead times, and a pushed-out line is taken into account for the lines after it.
- A dependent statistical forecast now waits for the component's Min Hits To Begin Forecasting.
- Saving a forecast algorithm at a hierarchy node that inherits it no longer moves the override from the node above.
- In "All" check mode, an unusual sale now qualifies for the item check based on the item setting, not the item-customer setting.
- Item-site replacements now give the replacing hierarchy node the right Ship-To and hierarchy level.
- Open Demand on the Inventory Snapshot now leaves out a replaced item-site's orders dated before the replacement takes effect.
- Custom Planning Bills no longer locks up when you pick Site, and offers only values that are in use.
- Dead Stock now leaves out replaced item-sites whose stock moved to the replacement, matching Excess and Slow Movers.
- The Forecast Growth screen now loads quickly instead of timing out on large hierarchies.
- On Hand Detail and Stratification Detail no longer add new columns to a saved view.
- Saved views on Overforecasted Periods and Due To Buy now bring back the chart series you chose.
- The over-time charts on the Executive Summary Stratification dashboard now honor the Start and End Date filter.
- Chart tooltips now format each value correctly, so a missing bar no longer shows On Hand dollars as a percent.
- Undo on the Default Supplier and Site Calendar Settings screens no longer makes saved holidays look undone, and both screens say holidays save right away.
- The Buy To Order Settings screen now labels its first box Dependent Forecast instead of a second Mode.
- The lost customer settings screens now explain that they remove past sales, rather than setting quantities to zero.
- Report subscriptions now show their saved CC recipients and days when you edit them, and Send Now shows its progress and names who received the email.
- Sales order fulfillment alerts now read correctly, without a repeated word or a comma in the line number.
- The Data Quality email now names who should fix each issue the same way the Import screen does.
- Delete mode now works on the Hub Relocation, Load Balancing, Replenishment Forecast Series Override, Estimates and Customer Estimates uploads.
- Re-uploading Hub Relocation, Load Balancing, Estimates or Customer Estimates rows now updates the existing records, and a second order on the same day is saved as its own estimate.
- Uploading Item-Site Hub Relocations now works instead of rejecting every row.
- Delete Uploaded Overrides now removes overrides that have more than one effective date, and says why a row deleted nothing.
- A nightly refresh no longer stops on a transfer that names a production supplier as its source; such transfers are now rejected and listed on Import Quality.
- Co-manufacturer transfer synchronization no longer fails during the nightly refresh.
- System Configuration now opens for anyone who can use one of its screens, and the Admin role now includes the Security screen and the SIOP permissions, so administrators can assign the SIOP Manager role.
- Service Level Optimization now hides Save Simulation Results from users without permission to edit service levels.
- Inventory expiration values and lot balances, and the cost and price weights in customer class settings, are now hidden from users without permission to view costs or prices.
- Edison's forecast explanations, stockout root causes and de-expedite recommendations no longer fail on some items, and say what they could not analyze instead.
- Edison handles follow-up questions and long answers more reliably, says when there is no history to check, and passes on StockIQ's messages instead of reporting a technical failure.
- Approving several Edison change previews at once now applies every one of them, not only the last.
- Edison's forecast error and lag accuracy figures now match the Forecast Snapshots screen.
- Edison's Help Center search now returns the parts of an article that match your question, not just its first section.
- The Edison Custom Context box is full height again on Edison Preferences and Edison Admin.
- Edison's buyer scorecard no longer times out for large customers.
- Focus Today briefing emails are now written in paragraphs, like the other briefings.
- Report and briefing email analyses now use fewer Edison credits.
- MCP connections no longer time out on streamed responses, rate-limit replies say how long to wait, and actions that send email or save information refuse to run when a required value is missing.
- The collapsed left-hand menu's color now reaches the bottom of the window.
- Help Center articles on forecasts in closed periods and on Edison briefing credits have been corrected.
- Pages respond a little faster because sign-in settings are no longer read from the database on every request.
- Saving some import and refresh log records no longer fails with an error.